Text us the yard
A photo and a rough length gets you a price range the same day. No visit needed for that part.
Gates and repairs in Dallas, TX
Every gate we hang is built on a welded steel frame, because a wood-framed gate drops a little every year until the latch stops catching. Walk gates, double drive gates, pool gates that self-close, and automatic openers on solar or hardwired power.
Most leaning fences in North Texas are a post problem, not a picket problem: the clay heaved, the wood rotted at the ground, or the post was never set deep enough. We replace the post with steel and reuse the pickets where they are sound.
From a photo of the yard to the last gate.
We walk the line
Forty minutes on site. We check the survey, call in utility locates, look at grade and access, and hand you a written price per foot.
We build it
Posts one day, pickets and gates the next on most yards. Old fence hauled away, site swept.
Walk-through
You walk the fence with the crew lead. Anything not right gets fixed before the balance is due.
Frequently asked questions
It depends on the type, the length, the gates and whether the old fence has to come out. We give you a price per foot in writing after we walk the line, usually the same day. Text a photo and a rough length and we can give you a range before anyone visits.
Most cities in the Metroplex want a permit for a new fence, and most HOAs want to approve the style and height. We fill out the HOA form for you and pull the permit where one is needed. Dallas, Plano, Frisco and McKinney all differ, and we know them.
A typical backyard is one to two days once the materials are on site. Iron and long rail fences take longer. We tell you the schedule when we hand you the price.
Yes, but not right away. New cedar needs about six weeks to dry before stain will soak in. We come back and stain it, or you can, and either way it roughly doubles the life of the pickets.
We tear it out and haul it away. That is included in every replacement, along with the concrete from the old posts.
Every fence gets steel-framed gates so they never sag, with hardware you can work with a glove on. Double drive gates and automatic openers are available on cedar and iron.
Get a price on your fence
Call or text for a same-day range, or send the form with a photo of the yard and we come back with a number and the next open estimate slot.
(214) 555-0148hello@cedarridgefence.com4110 Ross Ave, Dallas, TX 75204
Dallas, Plano, Frisco, McKinney, Allen, Richardson
Mon–Fri 7–6 · Sat by appointment